no_claim decorator was recently added in method
get_device_info_dyn() but it was missed to get imported from
usrp_mpm.rpc_utils which causes device initialize failure.
For the multisample version of the DUC block, in order
to align with the singlesample behavior this changes the packet
generation in axi_rate_change_ms to only include the timestamp in
the first packet of each burst.
Add a parameter to the axi_rate_change_ms module called
EN_TIME_ALL_PKTS.
Set to 1, the module will calculate timestamps
for all packets of the output burst.
Set to 0, the module will only insert a timestamp in the first
pkt of each generated output burst.
- Verify signature in case the device does not support customizable
FPGA (just as sanity check before actual loading the bitstream).
- Extract the bitstream from the bootgen generated .bin file
otherwise.
Provide the following two functions by wrapping the "bootgen"
command line tool:
verify: verify the validity of the signature of the .bin file.
extract_bitstream: extract the FPGA bitstream from the .bin file.
This works if the .bin file includes the FPGA bitstream as a
single partition.
- add optional --empty-on-error-non-ci to derive_docker_image_matrix.py
to downgrade derivation errors to warnings in non-strict builds
- handle partial DockerImageNames inputs by tolerating missing/empty
source matrices and returning {} when fallback mode is active
- refactor matrix unit tests to be artifact-driven and non-strict
outside CI (warn/skip instead of fail)
- keep strict failure behavior for CI reasons, while allowing fallback
in manual and PR runs
Adding the RFNoC DDC and DUC blocks to our shipping bitfiles.
The new wideband DxC implementation allow processing input/output
rates up to a maximum of 2000MSps.
This commit adds the DDC/DUC blocks to some of our shipping
bitfiles for all channels.
Co-authored-by: Niels Garibaldi <niels.steffen.garibaldi@emerson.com>
Co-authored-by: André Zoch <andre.zoch@emerson.com>
Co-authored-by: Meghana Halladamath <meghana.halladamath@emerson.com>
Co-authored-by: Wade Fife <wade.fife@ettus.com>
Co-authored-by: Max Köhler <max.koehler@emerson.com>
Updated the host related files to support wideband DxC block
variants.
The singlesample and multisample variants both have the same API,
but internally they are using different register address spaces to
interact with the FPGA implementation.
The host implementation checks which implementation a RFNoC DxC
block is using by checking the block version number and will then
automatically choose the correct register address scheme.
This is all transparent to the user, the Block API stays the same.
Co-authored-by: Niels Garibaldi <niels.steffen.garibaldi@emerson.com>
Co-authored-by: André Zoch <andre.zoch@emerson.com>
Co-authored-by: Meghana Halladamath <meghana.halladamath@emerson.com>
Co-authored-by: Wade Fife <wade.fife@ettus.com>
Co-authored-by: Max Köhler <max.koehler@emerson.com>
Added variants for the DDC/DUC blocks that can process multiple
samples per cycle and can be used for bandwidths higher than
200Mhz.
This new feature is integrated into the existing RFNoC DDC/DUC
blocks. Depending on the Radio bandwidth specified for the USRP
variant, the DxC blocks will instantiate the existing singlesample
implementation(for FPGA image variants <= 200MHz) or instantiate
the multisample implementation(for FPGA image variants > 200MHz).
Co-authored-by: Niels Garibaldi <niels.steffen.garibaldi@emerson.com>
Co-authored-by: André Zoch <andre.zoch@emerson.com>
Co-authored-by: Meghana Halladamath <meghana.halladamath@emerson.com>
Co-authored-by: Wade Fife <wade.fife@ettus.com>
Co-authored-by: Max Köhler <max.koehler@emerson.com>
