mirror of
https://github.com/EttusResearch/uhd.git
synced 2026-10-25 17:36:10 +00:00
47f12a1e9c
MASK_GPIO_SHDN_SW ( GPIO[52] ) should be shifted by "GPIO_SHDN_SW" but "GPIO_FX3_SCLK ". Otherwise GPIOs of FX3 will initial GPIO_FX3_SCLK ( GPIO[53] ) as GPIO and SPI respectively. It will make GPIO[53] conflict between SPI and GPIO, and SHDN_SW will not work properly as a power switch. |
||
|---|---|---|
| .. | ||
| e300 | ||
| fx2 | ||
| fx3 | ||
| octoclock | ||
| usrp2 | ||
| usrp3 | ||
| README.md | ||
Firmware for USRP Devices
fx2/
Description: This is the firmware for the FX2 USB PHY.
Devices: USRP1 and B100 devices.
Tools: sdcc, cmake
Build Instructions:
- mkdir
<build directory> - cd
<build directory> - cmake
<source directory> - make
fx3/
Description: This is the firmware for the FX3 USB PHY.
Devices: USRP B200 and USRP B210
Tools: Cypress FX3 SDK
Build Instructions:
Please see the fx3/README.md file for additional instructions.
octoclock/
Description: Firmware for the Octoclock device.
Devices: Octoclock.
Tools: avrtools, cmake
Build Instructions:
- mkdir
<build directory> - cd
<build directory> - cmake
<source directory> - make
zpu/
Description: Firmware for the soft CPUs in the UHD FPGA images.
Devices: USRP2 and N-Series devices.
Tools: zpu-gcc, cmake
This code requires the gcc-zpu tool-chain which can be found here:
http://opensource.zylin.com/zpudownload.html
zpu-elf-gcc should be in your $PATH
Build Instructions:
- mkdir
<build directory> - cd
<build directory> - cmake
<source directory> - make