#include "ioCC2530.h"

#define LED1 (P1_0)
#define LED2 (P1_1)
#define SW1 (P1_2)
unsigned char count = 0;
unsigned char count_btn = 0;
void initial_gpio(void){
  P1SEL &=~0X07;
  P1DIR |=0X03;
  P1DIR &=~0X04;
  
  LED1 = 0;
  LED2 = 0;
}

void initial_interrupt(void){
      
     IEN2 |=0X10;
     P1IEN |=0X04;
     PICTL |=0X02;
      //
      T1CTL |=0X0C;
      //最大值
      T1CC0L = 12500 & 0xff; //低八位
      T1CC0H =(12500 & 0xff00) >>8; //高八位
      
      T1IE = 1;
      T1OVFIM = 1;
      EA = 1;
      T1CTL |=0X03;
      IP1=0X10;
      
}
#pragma vector = T1_VECTOR
__interrupt void control_Timer(void){
  
      T1STAT &=~0X20;
      count++;
      if(count == 1){
        LED1 = 1;
        LED2 = 0;
      }
      if(count == 2){
        LED1 = 0;
        LED2 = 1;
        count = 0;
      }
}

#pragma vector = P1INT_VECTOR
__interrupt void btn(void){
  
      if(P1IFG & 0X04){
        count_btn++;
        switch(count_btn){
        case 1:
              T1CC0L =18750 & 0xff;
              T1CC0H =(18750 & 0xff00) >>8;
              break;
        case 2:
              T1CC0L =(62500)& 0xff;
              T1CC0H =((62500)& 0xff00)>>8;
              break;
        case 3:
              T1IE = 0;
              T1OVFIM = 0;
              LED1 =0;
              LED2 =0;
              break;
        default:
              T1IE = 1;
              T1OVFIM = 1;
              T1CC0L = 12500 & 0xff;
              T1CC0H = (12500 & 0xff00) >>8;
              count_btn = 0;
        }
      }
      P1IFG &=~0X04;
      P1IF = 0;
}

void main(){
  initial_gpio();
  initial_interrupt();
  
  for(;;);
}