mirror of
https://github.com/EttusResearch/uhd.git
synced 2026-10-25 17:36:10 +00:00
Update CHANGELOG for the upcoming 3.15 release
This commit is contained in:
Martin Braun
parent
ab597deabc
commit
8d02bc138a
420
CHANGELOG
420
CHANGELOG
@ -1,193 +1,327 @@
|
||||
Change Log for Releases
|
||||
==============================
|
||||
|
||||
## 003.015.000.000
|
||||
* N320: Fix MCR initialization, fix checks for LO distribution board, reset RX
|
||||
IQ balance on init, replace DRAM FIFO with replay block, improve constraints,
|
||||
fix I/Q imbalance compensation
|
||||
* N310: increase default dc offset averaging window, make tunes asynchronous,
|
||||
add capability to control RF filter bypass and freq.band limits, fix setting
|
||||
user DB EEPROM, correctly report N321 vs N320, improve DDR3 BIST, update max
|
||||
revision to 7, fix DMA arbitration to use contiguous packets, replace DRAM
|
||||
FIFO with replay block, fix SFP link up status
|
||||
* X310: Fix max bitfile size, fix GPIO ATR property access type, heavily
|
||||
refactor, introduce conn_mgr, add DPDK support, add
|
||||
capability to flash NI-2974 FPGA, fix clocking code, enable 11.52 MHz and
|
||||
23.04 MHz system ref rates, improve usage of constrained device args, enable
|
||||
ADC gain through RFNoC API
|
||||
* E320: Fix time source clobbering ref source, add support for RevE, fix
|
||||
reporting of FPGA version hash, fix SFP link up status, fix missing ce_clk
|
||||
driver
|
||||
* E310: Convert to MPM architecture, fix uhd_image_loader usage, fix DMA
|
||||
arbitration to use contiguous packets, reduced DMA chans to 4 (using data
|
||||
stream muxing), fix DRAM_TEST target build
|
||||
* B200: Add command to query bootloader status, fix sc12 streaming, fix FIFO
|
||||
sizes on GPIFII interface
|
||||
* UBX: add temperature compensation mode
|
||||
* SBX: Only update ATRs when lock state changes
|
||||
* TwinRX: add LO charge pump properties, increase default charge pump value on
|
||||
LO1, add low spur tuning mode, fix duplicate write to N value in DDC
|
||||
* RFNoC/device3: Read command FIFO size from device instead of hardcoding
|
||||
values, fix multidevice graph connections, ENABLE_RFNOC now defaults to ON,
|
||||
search all nodes for tick rate, add update_graph() call which lets blocks do
|
||||
a graph-wide update of properties, fix missing port arg in SR_WRITE Noc-Script
|
||||
call, constrain send/recv_frame_size baed on MTU, fix flushing on init/deinit,
|
||||
disable FC ACKs for lossless links
|
||||
* RFNOC/FPGA: Fix rb_stb in split stream block, fix off-by-one error in the
|
||||
window block, fix phase reset and -accumulator for DDC and DUC blocks, fix
|
||||
flushing on split-stream block, fix DC offset issue with DDS by using proper
|
||||
rounding, fix DUC/DDC sample rate switching by latching N on M in
|
||||
axi_rate_change, various fixes to uhd_image_builder, fix MTU settings in
|
||||
blocks, align byte count to 8-byte word
|
||||
* Python API: Replace Boost.Python with PyBind11, fix benchmark_rate statistics,
|
||||
fix phase alignment test script
|
||||
* UHD: Allow ignoring fallthrough warnings, reduce Boost footprint, remove gpsd
|
||||
dependency, improve streaming, reduced the number of compiler warnings,
|
||||
introduce pop() to the prop tree
|
||||
* MPM/mpmd: Introduce compatible rev numbers to support future hardware, fix
|
||||
some resource leaks in mpmd, fix spurious reclaims causing unnecessary
|
||||
warnings, fix resource leaks in liberio xport, allow to mux data streams over
|
||||
liberio transports (e.g. to require fewer DMA channels on E310), wait for DPDK
|
||||
links to come up before proceeding, relax failure handling when updating
|
||||
components (fixes spurious errors when updating FPGA images over SFP)
|
||||
* FPGA: Use new device-tree overlay syntax, upgraded to Vivado 2018.3, broke
|
||||
various paths with critical timing, allow SystemVerilog source files, improve
|
||||
viv_modify_bd and viv_modify_tcl_bd, fix resets on 2clk FIFOs
|
||||
* USB: Allow cancelled USB requests to occur
|
||||
* Logging: Always honour log level, don't log colours for non-ttys, fix
|
||||
includes, demote various log messages, fix logging colours, fix deadlock on
|
||||
Windows machines
|
||||
* Examples: Fix benchmark_rate INIT_DELAY, fix memory leak in tx_samples_c
|
||||
* Tests: Make the Python interpreter for devtests a parameter, add unit tests to
|
||||
MPM
|
||||
* Utilities: Fix converter benchmark for Py3k and scaling issue
|
||||
* Tools: Fix kitchen_sink
|
||||
* Docs: Various fixes, fix Doxygen warnings, fix links to KB
|
||||
* C API: Add uhd_get_abi_string, uhd_get_version_string
|
||||
* CMake: Make manpage compression optional, allow setting of PKG_DOC_DIR from
|
||||
the CMake commandline, add replay example, fix missing 'project', replace
|
||||
ENABLE_PYTHON3 with a simpler Python detection, clean up superfluous modules,
|
||||
improve log statements, bump dependency min versions, add MPM unit testing,
|
||||
fix missing BIGOBJ for MSVC
|
||||
* Formatting: Apply clang-format to all files, break after template<>
|
||||
|
||||
|
||||
|
||||
## 003.014.001.000
|
||||
N320: Terminate the DAC when not transmitting
|
||||
E320: Add support for rev E
|
||||
E320: Added .gitignore for FPGA build products
|
||||
X300: Add DPDK support
|
||||
X300: add capability to flash NI-2974 FPGA
|
||||
X300: Broke two critical timing paths in FPGA
|
||||
X300: fixed udp WSA buffer size assignment issue
|
||||
E310: Fix DRAM_TEST target build
|
||||
B200: Add bootloader for FX3 (fix for B2xx failing to enumerate)
|
||||
TwinRX: Expose charge pump current for LO2
|
||||
TwinRX: Add low spur mode for LO2
|
||||
TwinRX: increase rev c lo1 charge pump default value
|
||||
TwinRX: Fix tick rate
|
||||
Device3: Constraint send/recv_frame_size based on down/upstream MTU
|
||||
Device3: Fix MTU and default frame sizes
|
||||
RFNoC: Search all nodes for tick rates
|
||||
RFNoC: Change default address for the reg readbacks
|
||||
uhd_image_builder: Let the OOT module point to folders not named "rfnoc"
|
||||
uhd_image_builder: Add --auto-inst-src
|
||||
MPMD: Fix spurious reclaim call after unclaim
|
||||
MPMD: Release resources on destruction
|
||||
MPM: Add SW/HW compat
|
||||
liberio: Release context holder on destruction of last liberio xport
|
||||
transport: fixed a pre-mature buffer reset
|
||||
nirio: Fix typo in nirio_zero_copy
|
||||
GPSD: fix API for 'gps_read'
|
||||
AD9361: Fix return values for tune and set_clock_rate
|
||||
DUC/DDC: Fix phase reset and accumulation
|
||||
cores: Use NSDMI consistently in ?x_dsp_core_3000.*
|
||||
Logging: fix deadlock issue on Windows machines
|
||||
Logging: Fix ANSI colour codes
|
||||
Utils: Add X300/X310 reset utility
|
||||
Docs: Improved Windows-related build instructions
|
||||
Docs: Add link to README for building custom filesystems for N3xx
|
||||
sim: Fixing the port number in use for connection
|
||||
tools: Fix for proj creation in ip_utils for tcl-based IP
|
||||
tests: Fix mock_ctrl_iface for 32-bit MSVC
|
||||
|
||||
## 003.014.000.000
|
||||
* N320: Add N320 and N321
|
||||
* Test: Add Python API test
|
||||
* Device3: Move from packet-based to byte-based flow control
|
||||
* N320: Add support for N320 and N321
|
||||
* USRP-2974: Add support for USRP-2974
|
||||
* DPDK: Add DPDK-based sockets-like library (for N3xx)
|
||||
* N3xx: clocking API changes for transitioning clock and time sources
|
||||
* N3xx: Bump max rev to G/6
|
||||
* N3xx: Improve error messages for invalid clock/time settings
|
||||
* N3xx: Get RFNoC crossbar baseport from FPGA
|
||||
* N3xx: init peripherals before loading FPGA (to fix SFP0 init issues)
|
||||
* N3xx: Move Linux kernel to 4.15
|
||||
* N3xx/E320: Prepend SDK filename with device name
|
||||
* N3xx: Update max rev to 7 (H)
|
||||
* N3xx: Remove DDR3 from standard BIST collection
|
||||
* N3xx: BIST: Improve DDR3 BIST to check for DmaFIFO
|
||||
* N3xx: BIST: Auto-load the AA image for the ddr3 BIST
|
||||
* N3xx: BIST: DDR3 test only enumerates first block
|
||||
* N310: Modify AD9371 reset function to keep it in reset
|
||||
* N310: move init_rf_cal before JESD de/framer bringup
|
||||
* N310: Fix sporadic power on failures (requires firmware update)
|
||||
* E3xx: Increase spp limit for E3xx radio
|
||||
* E320: bist: Fix ref_clock lock test implementation
|
||||
* E320: bist: Add link_up test
|
||||
* E320: Add all 5 temp sensors, fan sensor and rssi sensors per channel
|
||||
* E320: Fix tx/rx atr - antenna and frequency settings
|
||||
* E320: Enable devtest for E320
|
||||
* E320: images: Separate images package for Aurora image
|
||||
* E320: Get RFNoC crossbar baseport from FPGA
|
||||
* E320: add fpga_version_hash to e320 device info
|
||||
* E310: Fix initialization of antenna and frequency values
|
||||
* E31x: Destruct RFNoC before loading idle image
|
||||
* X300: Reduce default send_frame_size to 4000 over Ethernet
|
||||
* UHD: Release recv buffers earlier in rx_streamer
|
||||
* Device3: Constrain send_buff_size to input fifo size
|
||||
* X300: Change Ethernet buffering
|
||||
* MPMD: Parallelize broadcast-finding
|
||||
* Device: Parallelize device discovery
|
||||
* Docs: Fix Doxygen warnings
|
||||
* X300: Log git hash and compat number as debug message
|
||||
* X300: Move defaults to their own header
|
||||
* X300: Use constrained_args
|
||||
* X300: Enable clock_source and time_source device args
|
||||
* X300: NIRIO: Demote RPC client cancel/abort to TRACE
|
||||
* X300: remove default_buff_args properties
|
||||
* X300: Remove 120 MHz master_clock_rate option
|
||||
* X300: Set minimum master clock rate to 184.32 MHz
|
||||
* X300: Factor our PID -> MB type and MB type -> product name mapping
|
||||
* X300: Remove usage of boost::bind
|
||||
* X300: Fix compiler warnings related to type conversions
|
||||
* X300: Fix tick and sample rate setting
|
||||
* X300: Enable ADC gain through RFNoC API
|
||||
* X300: Demote NIRIO rpc client start/stop log messages to DEBUG
|
||||
* X300: Enable 11.52 MHz and 23.04 MHz system ref rates
|
||||
* X300: Enable x300_device_args.to_string()
|
||||
* X300: Catch more inconsistencies in x300_device_args
|
||||
* X300: Removed invalid 200 MHz sysref rate
|
||||
* X300: Change PLL CP currents in x300_clock_ctrl
|
||||
* B200: Remove superfluous fake lambda
|
||||
* B200: Add support for user regs
|
||||
* B200: Fix compiler warnings related to type conversions
|
||||
* B100: Move fifo_ctrl_excelsior to b100 subdir
|
||||
* B100: Fix fifo_ctrl_excelsior not exiting
|
||||
* B100: Remove all Boostisms from fifo_ctrl_excelsior
|
||||
* B100: Demote some clocking-related log messages to trace
|
||||
* X300: Log git hash and compat number as debug message
|
||||
* N310: Modify AD9371 reset function to keep it in reset
|
||||
* N3xx: clocking API changes for transitioning clock and time sources
|
||||
* E320: bist: Fix ref_clock lock test implementation
|
||||
* UHD: Fix ADF400x driver for ref counter and charge pump mode
|
||||
* E320: bist: Add link_up test
|
||||
* MPM: Get list of temperatures from all thermal zones
|
||||
* E320: Add all 5 temp sensors, fan sensor and rssi sensors per channel
|
||||
* E320: Fix tx/rx atr - antenna and frequency settings
|
||||
* E320: Enable devtest for E320
|
||||
* X300: Move defaults to their own header
|
||||
* UHD: Improve constrained_device_args_t
|
||||
* X300: Use constrained_args
|
||||
* X300: Enable clock_source and time_source device args
|
||||
* Test: Integrate Python API Tester into Devtest
|
||||
* N3xx: Bump max rev to G/6
|
||||
* N3xx: Improve error messages for invalid clock/time settings
|
||||
* E320: images: Separate images package for Aurora image
|
||||
* B200: Remove superfluous fake lambda
|
||||
* B200: Add support for user regs
|
||||
* Docs: Add info on how to implement user regs on B200
|
||||
* UHD API: Add multi_usrp::get_user_settings_iface()
|
||||
* N310: move init_rf_cal before JESD de/framer bringup
|
||||
* UHD: Remove usage of time_t (except when required)
|
||||
* NIRIO: Demote RPC client cancel/abort to TRACE
|
||||
* RFNoC: Convert SR_READBACK_REG_FIFOSIZE to bytes
|
||||
* Utils: Add Zip test to downloader
|
||||
* Utils: Factor wait_for_lo_lock() out of cal utils
|
||||
* DPDK: Add DPDK-based sockets-like library
|
||||
* MPMD: add option to enum rfnoc blocks from args
|
||||
* E320: Get RFNoC crossbar baseport from FPGA
|
||||
* N3xx: Get RFNoC crossbar baseport from FPGA
|
||||
* UHD: add default xport params to udp_zero_copy
|
||||
* MPM: add link_speed xport_info
|
||||
* MPMD: add link speed to xport udp
|
||||
* Device3: remove tx_hint[send_buff_size]
|
||||
* X300: remove default_buff_args properties
|
||||
* RFNoC: Add ability to enable/disable RX timestamp
|
||||
* RFNoC: add async message handler
|
||||
* Examples: add rfnoc_radio_loopback example
|
||||
* UHD: Update rx_frontend_gen3.v controls for 1/4-rate mixer
|
||||
* UHD API: Move definition of ALL_MBOARDS and ALL_CHANS constants to
|
||||
CPP file.
|
||||
* MPM: Add __mpm_device__ as usrp_hwd module variable
|
||||
* MPM: Add usrp_update_fs
|
||||
* UHD: Add traffic counter to null source sink
|
||||
* Examples: Add benchmark_streamer example
|
||||
* Tools: Add tool to analyze settling time of gain and freq changes
|
||||
* UHD API: Add multi_usrp::set_sync_source() API
|
||||
* UHD: Improve documentation for the UHD exception types
|
||||
* Examples: Add dual measurements to benchmark_streamer
|
||||
* MPM: Add i2c APIs for simple transfers
|
||||
* MPM: Add vector-based transfer function for i2c
|
||||
* UHD: Improve documentation for set_{time,clock,sync}_source
|
||||
* CMake: Bump CMake minimum version to 2.8.12
|
||||
* MPM: Add variable configuration support to nijesdcore
|
||||
* MPM: Add eyescan utility to nijesdcore
|
||||
* MPM: Add PRBS-31 testing to nijesdcore
|
||||
* CMake: Change SOVERSION and VERSION for the library files
|
||||
* Test: Add graph impl test to device3_test
|
||||
* RFNoC: Changes to traffic counter register names
|
||||
* X300: Remove 120 MHz master_clock_rate option
|
||||
* MPM: Add convenience function to pull i2c bus from device tree
|
||||
* UHD: add .clang-format file
|
||||
* MPM: Open and close i2c file descriptor on every access
|
||||
* UHD: Add device arg to enable dual ethernet for tx
|
||||
* Test: Retrofit sph test to use new mock transport
|
||||
* X300: Set minimum master clock rate to 184.32 MHz
|
||||
* RFNoC: Fix replay example port args
|
||||
* RFNoC: Fix default SPP for replay
|
||||
* RFNoC: Add halt to replay API
|
||||
* UHD API: Add sync source to Python API
|
||||
* Examples: Clean up rfnoc_radio_loopback example
|
||||
* UHD: Improve compatibility of abs() calls
|
||||
* UHD: include <stdint.h> for int64_t for time_spec
|
||||
* USRP-2974: Add support for USRP-2974
|
||||
* UHD API: Add support for Tx LO control to C API
|
||||
* E310: Fix initialization of antenna and frequency values
|
||||
* Test: Enable rx_samples_to_file in devtest for X300
|
||||
* Examples: Add keyboard controls to rx_ascii_art_dft
|
||||
* Examples: Add benchmark_streamer support for multi-channel streamer
|
||||
* MPM: Multiprocessing instead of threading for claimer loop
|
||||
* MPM: Factor out user EEPROM code into own module
|
||||
* RFNoC: Fix late packet errors
|
||||
* X300: Factor our PID -> MB type and MB type -> product name mapping
|
||||
* X300: Remove usage of boost::bind
|
||||
* Docs: Add manual page on compat numbers
|
||||
* UHD: Updates to coding guidelines
|
||||
* Examples: Optimize benchmark_rate start time
|
||||
* Examples: Improve formatting and comments in tx_waveforms
|
||||
* Examples: Optimize tx_waveforms memory allocations
|
||||
* UHD: Fix MSVC warnings by changing a size_t to unsigned int or
|
||||
uint32_t
|
||||
* Test: Fix CMake `endif` warning for devtest
|
||||
* MPM: Add gpgga sensor function to GPSd iface
|
||||
* Test: Fix compiler warning about unused timestamp
|
||||
* X300: Fix compiler warnings related to type conversions
|
||||
* B200: Fix compiler warnings related to type conversions
|
||||
* Test: Add #include <thread> in system time test
|
||||
* Examples: change boost to std for time commands
|
||||
* UHD: Add potentially missing but sometimes inferred include for
|
||||
experts
|
||||
* UHD: Add default xport params to udp_wsa_zero_copy
|
||||
* Examples: Add LO Offset to rx_samples_to_file
|
||||
* Examples: update lo-offset naming in tx from file
|
||||
* Examples: Add lo-offset to tx_waveforms
|
||||
* UHD: Move device3 flow control functions to header for benchmark
|
||||
utility
|
||||
* Test: Add benchmark of streaming code paths
|
||||
* MPM: Add bridge mode support
|
||||
* MPM: Parameterize max UDP link allocation
|
||||
* MPM: xport: add commit_xport docstring
|
||||
* MPM: Improve error message on double-claim
|
||||
* MPMD: Parallelize broadcast-finding
|
||||
* MPMD: add option to enum rfnoc blocks from args
|
||||
* MPMD: add link speed to xport udp
|
||||
* MPMD: Add API to set RPC timeout atomically
|
||||
* MPMD: Move timeout constants to header
|
||||
* MPMD: Use new RPC API with timeout
|
||||
* MPMD: Increase claim_rpc call timeout
|
||||
* Examples: Improved error message in tx_waveforms
|
||||
* MPMD: implement get_*x_hints
|
||||
* MPMD: honor user supplied send/recv_frame_size args
|
||||
* MPMD: Use 4096 bytes for frame size for liberio transport
|
||||
* MPMD: Use init timeout for update_component
|
||||
* MPMD: Allow reclaim failures on component updates
|
||||
* MPMD: Fix typecast warning in property tree default settings
|
||||
* Device: Parallelize device discovery
|
||||
* Device3: Move from packet-based to byte-based flow control
|
||||
* Device3: Constrain send_buff_size to input fifo size
|
||||
* Device3: remove tx_hint[send_buff_size]
|
||||
* Device3: Replace NULL with 0 for empty function pointers
|
||||
* Device3: Remove redundant function call
|
||||
* Device3: Fix flow control window and interval
|
||||
* UHD: Release recv buffers earlier in rx_streamer
|
||||
* UHD: Fix ADF400x driver for ref counter and charge pump mode
|
||||
* UHD: Improve constrained_device_args_t
|
||||
* UHD API: Add multi_usrp::get_user_settings_iface()
|
||||
* UHD: Remove usage of time_t (except when required)
|
||||
* UHD: add default xport params to udp_zero_copy
|
||||
* UHD: Update rx_frontend_gen3.v controls for 1/4-rate mixer
|
||||
* UHD API: Move definition of ALL_MBOARDS and ALL_CHANS constants to
|
||||
CPP file.
|
||||
* UHD: Add traffic counter to null source sink
|
||||
* UHD API: Add multi_usrp::set_sync_source() API
|
||||
* UHD: Improve documentation for the UHD exception types
|
||||
* UHD: Improve documentation for set_{time,clock,sync}_source
|
||||
* UHD: add .clang-format file
|
||||
* UHD: Add device arg to enable dual ethernet for tx
|
||||
* UHD API: Add sync source to Python API
|
||||
* UHD API: Add support for Tx LO control to C API
|
||||
* UHD: Improve compatibility of abs() calls
|
||||
* UHD: include <stdint.h> for int64_t for time_spec
|
||||
* UHD: Updates to coding guidelines
|
||||
* UHD: Fix MSVC warnings by changing a size_t to unsigned int or
|
||||
uint32_t
|
||||
* UHD: Add potentially missing but sometimes inferred include for
|
||||
experts
|
||||
* UHD: Add default xport params to udp_wsa_zero_copy
|
||||
* UHD: Move device3 flow control functions to header for benchmark
|
||||
utility
|
||||
* UHD: Make sure BOOST_VERSION is always available
|
||||
* Docs: Add comments for TwinRX and MCR
|
||||
* DPDK: Add ARP responder, set MTU, and clean up API
|
||||
* DPDK: Add blocking recv calls to uhd-dpdk
|
||||
* DPDK: Add dpdk_zero_copy transport
|
||||
* Test: Add unit test for DPDK transport
|
||||
* Test: Add arguments to dpdk_test to control core mapping
|
||||
* DPDK: Move uhd-dpdk header to uhdlib
|
||||
* UHD: Make clang-format skip formatting for some data structures
|
||||
* UHD: Remove vim hints in headers
|
||||
* Examples: Move ascii_art_dft main function within include guard
|
||||
* UHD/MPM: Apply clang-format to all files
|
||||
* UHD: Add modified clang-format for headers
|
||||
* MPM: Add bridge mode support
|
||||
* RFNoC: Fix detection of outstanding acks by ctrl_iface
|
||||
* UHD: Replace uhd::math::log2 with std::log2
|
||||
* UHD: Replace boost::*::{lcm,gcd}() with portable versions
|
||||
* UHD API: Change get_{tx/rx}_dc_offset_range default from ALL_CHANS
|
||||
to 0
|
||||
* UHD: Revert to boost instead of std for sleep in some instances
|
||||
* UHD: Replace Boost macros with custom ones for endianness
|
||||
* MPMD: implement get_*x_hints
|
||||
* MPMD: honor user supplied send/recv_frame_size args
|
||||
* UHD: muxed_zero_copy_if fixes
|
||||
* Examples: Fix boundary condition in ascii_art_dft plotting
|
||||
* CMake: Extend list of additional Boost versions
|
||||
* Device3: Replace NULL with 0 for empty function pointers
|
||||
* RFNoC: Add some missing virtual destructors
|
||||
* Test: replace has_key by using 'in'
|
||||
* Test: Add universal_newlines to subprocess call in devtest
|
||||
* MPMD: Use 4096 bytes for frame size for liberio transport
|
||||
* DPDK: Add xport_mgr for dpdk_zero_copy
|
||||
* DPDK: Cover all paths to request TX offloads
|
||||
* Test: Fix up dpdk_test to use current APIs
|
||||
* MPM: Parameterize max UDP link allocation
|
||||
* UHD: Replace Boost lock & mutex with std variety for AD9361 code
|
||||
* CPack: Fix RPM generation
|
||||
* Utils: Add check for gdb_eeprom before accessing
|
||||
* UHD: fix includes for boost::noncopyable
|
||||
* UHD: Fix buffer size warning on UDP transport
|
||||
* UHD: Remove duplicate operator=() for sid_t
|
||||
* UHD: Fix conversion warning in max287x
|
||||
* UHD: Fix various type-conversion compiler warnings
|
||||
* RFNoC: Convert SR_READBACK_REG_FIFOSIZE to bytes
|
||||
* RFNoC: Add ability to enable/disable RX timestamp
|
||||
* RFNoC: add async message handler
|
||||
* RFNoC: Changes to traffic counter register names
|
||||
* RFNoC: Fix replay example port args
|
||||
* RFNoC: Fix default SPP for replay
|
||||
* RFNoC: Add halt to replay API
|
||||
* RFNoC: Fix late packet errors
|
||||
* RFNoC: Fix detection of outstanding acks by ctrl_iface
|
||||
* RFNoC: Add some missing virtual destructors
|
||||
* RFNoC: Update FIFO XML definition
|
||||
* MPMD: Use init timeout for update_component
|
||||
* Docs: Add manual page for DPDK
|
||||
* Docs: Add information about what dpdk_zero_copy is doing
|
||||
* Tools: Make the UHD source gen a plugin for the phase alignment test
|
||||
* CMake: fix variable usage
|
||||
* RFNoC: Prevent unnecessary FC ACK packets
|
||||
* RFNoC: More graph traversal fixes
|
||||
* Device3: Remove redundant function call
|
||||
* RFNoC: Fix scaling of M and N values in DDC/DUC
|
||||
* X300: Fix tick and sample rate setting
|
||||
* RFNoC: Fix typos in legacy_compat
|
||||
* RFNoC: Limit number of control packets in flight
|
||||
* Device3: Fix flow control window and interval
|
||||
* E3xx: Increase spp limit for E3xx radio
|
||||
* E31x: Destruct RFNoC before loading idle image
|
||||
* N3xx: init peripherals before loading FPGA (to fix SFP0 init issues)
|
||||
* N3xx: Move Linux kernel to 4.15
|
||||
* N3xx/E320: Prepend SDK filename with device name
|
||||
* N310: Fix sporadic power on failures (requires firmware update)
|
||||
* RFNoC: Disable FC ACK packets for lossless links
|
||||
* RFNoC: Add valid num_input_ports check to node_ctrl_base
|
||||
* Utils: Add Zip test to downloader
|
||||
* Utils: Factor wait_for_lo_lock() out of cal utils
|
||||
* Utils: Add check for gdb_eeprom before accessing
|
||||
* Utils: Deny positional options in uhd_image_loader
|
||||
* Utils: Set tx gain to max for rx iq cal
|
||||
* Tools: Add tool to analyze settling time of gain and freq changes
|
||||
* Tools: Make the UHD source gen a plugin for the phase alignment test
|
||||
* Test: Add Python API test
|
||||
* Test: Integrate Python API Tester into Devtest
|
||||
* Test: Add graph impl test to device3_test
|
||||
* Test: Retrofit sph test to use new mock transport
|
||||
* Test: Enable rx_samples_to_file in devtest for X300
|
||||
* Test: Fix CMake `endif` warning for devtest
|
||||
* Test: Fix compiler warning about unused timestamp
|
||||
* Test: Add #include <thread> in system time test
|
||||
* Test: Add benchmark of streaming code paths
|
||||
* Test: replace has_key by using 'in'
|
||||
* Test: Add universal_newlines to subprocess call in devtest
|
||||
* Examples: add rfnoc_radio_loopback example
|
||||
* Examples: Add benchmark_streamer example
|
||||
* Examples: Add dual measurements to benchmark_streamer
|
||||
* Examples: Clean up rfnoc_radio_loopback example
|
||||
* Examples: Add keyboard controls to rx_ascii_art_dft
|
||||
* Examples: Add benchmark_streamer support for multi-channel streamer
|
||||
* Examples: Optimize benchmark_rate start time
|
||||
* Examples: Improve formatting and comments in tx_waveforms
|
||||
* Examples: Optimize tx_waveforms memory allocations
|
||||
* Examples: change boost to std for time commands
|
||||
* Examples: Add LO Offset to rx_samples_to_file
|
||||
* Examples: update lo-offset naming in tx from file
|
||||
* Examples: Add lo-offset to tx_waveforms
|
||||
* Examples: Improved error message in tx_waveforms
|
||||
* Examples: Move ascii_art_dft main function within include guard
|
||||
* Examples: Fix boundary condition in ascii_art_dft plotting
|
||||
* Docs: Fix Doxygen warnings
|
||||
* Docs: Add info on how to implement user regs on B200
|
||||
* Docs: Add manual page on compat numbers
|
||||
* Docs: Add comments for TwinRX and MCR
|
||||
* Docs: N3xx page shell formatting and bb image
|
||||
* Docs: n3xx: fix Salt formatting
|
||||
* Docs: Add note on manually disabling NEON extensions
|
||||
* Docs: Fixed typos in N3xx image names (SD card build)
|
||||
* Docs: Add notes on external reference frequencies for X300
|
||||
* CMake: Bump CMake minimum version to 2.8.12
|
||||
* CMake: Change SOVERSION and VERSION for the library files
|
||||
* CMake: Extend list of additional Boost versions
|
||||
* CMake: fix variable usage
|
||||
* Cmake: remove Boost from dyn libs for tests on Apple
|
||||
* Cmake: Fix MSVC options (add /bigobj)
|
||||
* Cmake: Use native format for setup.py
|
||||
* CPack: Fix RPM generation
|
||||
|
||||
## 003.013.001.000
|
||||
* E320: Fix front panel GPIO readback
|
||||
|
||||
Loading…
Reference in New Issue
Block a user